HIGH_CURRENT_OSCILLATOR

Published:2009/7/10 2:38:00 Author:May | From:SeekIC

The oscillator output of the XR-567 can be amplified using the output amplifier and high-current logic output available at pin 8. In this manner, the circuit can switch 100-mA load currents without sacrificing oscillator stability. The oscillator frequency can be modulated over ±6% in frequency by applying a control voltage of pin 2.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Signal_Processing/Oscillator_Circuit/HIGH_CURRENT_OSCILLATOR.html

Print this Page | Comments | Reading(3)