CRYSTAL_CONTROLLED_BUTLER_OSCILLATOR

Published:2009/6/24 23:13:00 Author:Jessie | From:SeekIC

Circuit NotcsA typical Butler oscillator (20-100 MHz) uses an FET in the second stage; the circuit is not reliable with two bipolars. Sometimes two FETs are used. Frequency is determined by LC values.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Signal_Processing/Oscillator_Circuit/CRYSTAL_CONTROLLED_BUTLER_OSCILLATOR.html

Print this Page | Comments | Reading(3)