Published:2011/6/6 5:14:00 Author:Felicity | Keyword: Hearing-aid (the 2nd), | From:SeekIC
Work of the circuit
The hearing-aid circuit consists of mike BM, resistor R1 and R2, capacitor C1-C4, potentiometer RP, integrated circuit, power switch S and earphone BE. (It is showed in picture 9-78.).
BM collects the sound signal andturns itinto faint electric signal. Then the signal is inputted from IC’s pin 7 through CI and RP. At last it is returned to sound by earphone after being amplifier.
If you change the value of RP you can change the volume.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Signal_Processing/Hearing_aid_the_2nd.html
Print this Page | Comments | Reading(3)
Code: