FM_MODULATOR

Published:2009/6/23 3:08:00 Author:Jessie | From:SeekIC

The FM modulator is built with a Motorola MC1648P oscillator. Two varactors, Motorola MV209, are used to frequency modulate the oscillator. The 5000-Ω potentiometer is used to bias the varactors for best linearity. The output fre-quency of approximately 100 MHz can be ad-justed by changing the value of the inductor. The output frequency can vary as much as 10 MHz on each side. The output level of the modulator is -5 dBm. In this prototype, the varactor bias was 7.5 V for best linearity; but this could be different with other varactors.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Signal_Processing/FM_MODULATOR.html

Print this Page | Comments | Reading(3)