Published:2009/7/22 2:15:00 Author:Jessie | From:SeekIC
The 555 can be connected in either monostable or astable configurations, but for continuous square waves, the astable circuit is used. The square-wave signal appears at pin 3 of the 555. The out-put frequency of the 555 astable multivibrator is found from
ƒo=1.44/[(R1+2R2)C1]The duty cycle of the 555's square-wave output is determined by the relationship between R1 and R2, and is given by: Duty cycle=(R1+R2)/R2
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Signal_Processing/555_SQUARE_WAVE_GENERATOR.html
Print this Page | Comments | Reading(3)
Code: