Published:2011/5/13 3:19:00 Author:Fiona | Keyword: constituted by OP amplifier feedback loop, the constant voltage-driven | From:SeekIC
Circuit function
This is a drive, detection circuit that is suitable for use bridge sensors.It is Driven by constant voltage, the voltage is ± 2.5V, if necessary to use the IC generating reference voltage,it can also use ± 5V or ± 10V.
Circuit Work
OP amplifier A1 is a +2.5 V reference voltage generating circuit, in order to output ten mA current, adds the current enhancer TT1. If the resistance of the bridge sensor is equivalent, A2's inverting input is hypothetical, so TT2 emitter voltage should be -2.5V.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Sensor_Circuit/the_constant_voltage_driven_bridge_sensor_circuit_constituted_by_OP_amplifier_feedback_loop.html
Print this Page | Comments | Reading(3)
Code: