GROUND_FAULT_HALL_SENSOR

Published:2009/7/9 4:54:00 Author:May | From:SeekIC

No electrical contact exists between the circuit and the conductor. The 7474 flip-flop is triggered by the output from the Hall sensor, op amp, and Schmitt trigger. This triggering activates the optocoupler, turns on the triac, and trips the circuit breaker.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Sensor_Circuit/GROUND_FAULT_HALL_SENSOR.html

Print this Page | Comments | Reading(3)