Published:2011/6/14 2:53:00 Author:TaoXi | Keyword: Electric, single-girder crane, radio remote controller | From:SeekIC
The right part of the dotted line is the original operating circuit of the crane, K1~K4 are the original manual operating buttons, now you can use the relay's contact point to replace it, SQ is the limit ascending switch. KM1~KM4 are the communication relays, and they can be used to control the ascending motor M1 and the traveling motor M2's reversal and positive-turning to realize the gourd walking and the goods lifting. The left part of the dotted line is the new wireless remote control circuit. In the circuit, the four output port A~D of the TX315B1 receiving circuit can drive the DC relays K1 ~ K4 through the drive tube VT ~ VT4.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Remote_Control_Circuit/Electric_single_girder_crane_radio_remote_controller_TX315B1.html
Print this Page | Comments | Reading(3)
Code: