VOLTAGE_DISCRIMINATOR

Published:2009/7/16 21:19:00 Author:Jessie | From:SeekIC

Output changes sharply when input signal rises above preset threshold such as -10 v, with circuit returning to initial state when input reaches still higher threshold such as -11 v. Width of resulting output pulse can be changed by varying R1, R2, or R3.-C. D. Todd, Sharp Discrimination of Voltage Differences, Electronics, 38:19, p 97-98.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Power_Supply_Circuit/VOLTAGE_DISCRIMINATOR.html

Print this Page | Comments | Reading(3)