Published:2009/7/20 20:48:00 Author:Jessie | From:SeekIC
Shunt regulator(+5 volts)using an ECG915 or ECG915D.For a ±5% fixed output resistor R1 is 2.15 ohms and R2 is 4.99 ohms,For metal can applications where Vz is required,a 6.2-volt zener should be connected in series with the regulated output(courtesy GTE Sylvania Incorporated).
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Power_Supply_Circuit/Shunt_regulator+5_voltsusing_an_ECG915_or_ECG915D.html
Print this Page | Comments | Reading(3)
Code: