Published:2009/7/16 1:51:00 Author:Jessie | From:SeekIC
The LT1172 is configured as a step-up converter. C2 is charged by L1 and discharges into C4 when the LT1172's power switch goes to ground. Resistor R3 adjusts the output voltage between -12 and -24 V.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Power_Supply_Circuit/POSITIVE_AND_NEGATIVE_VOLTAGE_SWITCHING_SUPPLY.html
Print this Page | Comments | Reading(3)
Code: