Noninverting_unity_gain_sample_and_hold_circuit_using_a_Datel_SHM_IC_1

Published:2009/7/19 20:19:00 Author:Jessie | From:SeekIC

Noninverting unity-gain sample-and-hold circuit using a Datel SHM-IC-1. The SHM-IC-1 is a 14-pin DIP with a 2 MHz bandwidth. The 100 K offset pot should be a 100 PPM/℃ 15-turn type, available from Datel. To zero ground pin 2 and pin 14, then adjust offset for zero output at pin 7 (courtesy Datel Systems, Inc.).



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Power_Supply_Circuit/Noninverting_unity_gain_sample_and_hold_circuit_using_a_Datel_SHM_IC_1.html

Print this Page | Comments | Reading(3)