NE602_DC_BIAS_CIRCUIT

Published:2009/7/17 2:38:00 Author:Jessie | From:SeekIC

There are several ways to power the NE602. A resistor should be placed in series between the power supply and the NE602 (a and b).A zener diode (c) or a voltage regulator (d) can also be used. The resistor R1 should provide 4.5 to 8.0 V at pin 8 of the NE602. The current draw is about 2.4 to 2.8 mA.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Power_Supply_Circuit/NE602_DC_BIAS_CIRCUIT.html

Print this Page | Comments | Reading(3)