Micropower_battery_splitter

Published:2009/7/24 0:26:00 Author:Jessie | From:SeekIC

This circuit provides symmetrical ±output voltages, both equal to one-half the input voltage (one 9-V battery in this case). The output voltages are referenced to pin 3 (output common). The circuit will operate with other battery voltages. If the battery exceeds 6 V, pin 6 should also be connected to pin 3, as shown by the dashed line.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Power_Supply_Circuit/Micropower_battery_splitter.html

Print this Page | Comments | Reading(3)