Published:2011/6/30 11:35:00 Author:Sophia | Keyword: Beijing City Hunter off-road vehicle, non-contact ignition system, charging system | From:SeekIC
Non-contact ignition system (see Figure 1)
Non-contact ignition system BJ2020SG SUV circuit wiring diagram is shown in Figure 1. In addition to the ignition system suits, the rest of the circuit is unchanged. Non-contact ignition system circuit is shown in Figure 1. Rotor with four poles (with the same number of cylinders) and the stator winding signal generator coil, when the distributor shaft rotates, Non-contact ignition system produces the ignition signal four times a week, the signal voltage input to the ignition module 7. The electronic circuit is used to control turn on and off of the final stage switch tube, when the magnetic-electric ignition signal generator signal is not sent; the ignition coil primary current can flow through the last stage switch tube. When the ignition signal arrives, the last stage switch tube is cut-off, and turn off the primary current, so that the secondary coil generate high voltage, spark plug ignites.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Power_Supply_Circuit/Beijing_City_Hunter_off_road_vehicle_non_contact_ignition_system_and_charging_system_circuit_diagram.html
Print this Page | Comments | Reading(3)
Code: