Published:2011/4/19 4:25:00 Author:May | Keyword: full automatic charger | From:SeekIC
working principleDiagram 4-27 is the principle diagram of this charger. The voltage of LM339's pin 5 V5=6V. When the battery voltage E is less than 12V, V4 is less than 6V. LM339's pin 2 outputs high level. It can let 9013 saturation. 3AD30 is on amplified state. The measured value is 300mA when using heavy current to charge. When E≥12V, V5≥6V. LM339's pin 2 output low level. 9013 and 3AD30 is cut off. It adopts 40mA low current to charge to the battery. The curved line of measured charge current is shown in diagram 4-28.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Power_Supply_Circuit/Battery_Charger/A_kind_of_full_automatic_charger_circuit.html
Print this Page | Comments | Reading(3)
Code: