Basic_F_V_converter_with_passive_filter

Published:2009/7/23 23:56:00 Author:Jessie | From:SeekIC

Fig. 12-21 This circuit is similar to that of Fig. 12-19, but with a passive filter added to reduce ripple. Typically, ripple is less than 1 mVp-p for frequencies from 200 Hz to 10 kHz. Again, set the 5-kΩ gain adjust for 10-V output with a 10-kHz input. National Semiconductor, Linear Applications Handbook 1991.p 1298.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Power_Supply_Circuit/Basic_F_V_converter_with_passive_filter.html

Print this Page | Comments | Reading(3)