Published:2012/12/3 20:33:00 Author:Ecco | Keyword: speed tester, testing , transistor quality | From:SeekIC
(1) The inserted NPN transistor is intact. IC's pin 3 is high, pin 4 is low, then the tested tube gets conduction, red light-emitting diode LED1 is light; when IC's pin 3 is low, pin 4 is high, then the tube is cut-off, LED1 and LED2 do not shine, the general view is twinkling light from LED1.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Measuring_and_Test_Circuit/The_speed_tester_circuit_for_testing_transistor_quality.html
Print this Page | Comments | Reading(3)
Code: