The mechanical arm movement spacing principle circuit

Published:2011/6/11 21:49:00 Author:qqtang | Keyword: mechanical arm, movement spacing | From:SeekIC

To make sure the mechanical catches and put workpieces in the right place, we often use the approaching sensor to limit its moving range. In the figure is the control diagram of the mechanical left/right movement spacing. The sensor is located in the place where the mechanical arm needs spacing, when the mechanical are moves left/right and gets close to the sensor, the sensor will output the control signal if it detects that the mechanical arm is approaching and reaches the regulated range, and the mechanical arm is stopped by the executing sector. Figure:The mechanical arm movement spacing principle circuit



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Measuring_and_Test_Circuit/The_mechanical_arm_movement_spacing_principle_circuit.html

Print this Page | Comments | Reading(3)