Published:2011/5/19 21:46:00 Author:Borg | Keyword: flash sequence, Daewoo | From:SeekIC
Flashing code reading: if the igniting switch is on but the engine is not running, connect the diagnosis plug with the ground, then the code can be got by flashing the fast repairing motor indicator. The character of the flashing sequence are: SES is on for 0.4s,SES is off,SES is off for 0.4s; the digital interval is 1.2s; code interval is 3.2s. The the flashing sequence of the normal code of 12 is seen in Figure 10.
The sequence of fault codes:The 10 bit number flash whose interval is 0.4sBreak for 1.2sThe 1 bit number whose interval is 0.4s.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Measuring_and_Test_Circuit/The_flash_sequence_of_the_Daewoo_fault_code_of__12.html
Print this Page | Comments | Reading(3)
Code: