Published:2011/5/26 23:10:00 Author:Borg | Keyword: LEV, evaluation circuit | From:SeekIC
This is a LEV evaluation circuit of μA741. When the input signal Ui is lower than IV, the LED1 is glowing; when the signal ranges 1~2V, the LED2 is glowing; when the signal is higher than 2V, the LED3 is glowing. As the circuitis installed with a calculating amplifier, so we can briefly evaluate the LED of weak signals. The reference voltage of U1 and U2 is provided by a voltage-steady diode. The EH of non-sensitive area is computed in the following way, i.eIn the formula, HOU and UOL are the maximum positive and negative voltages respectively of the computing amplifiers of A1 and A2.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Measuring_and_Test_Circuit/The_LEV_evaluation_circuit_of_μA741.html
Print this Page | Comments | Reading(3)
Code: