SSB_CW_PRODUCT_DETECTORS

Published:2009/7/10 3:33:00 Author:May | From:SeekIC

These circuits are used for product detection of single-sidebound (SSB) and CW signals. BFO injection is typically 0.5 to 1 V rms for both circuits. Frequencies can be up to 25 MHz or so.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Measuring_and_Test_Circuit/SSB_CW_PRODUCT_DETECTORS.html

Print this Page | Comments | Reading(3)