Published:2012/9/13 21:11:00 Author:Ecco | Keyword: Pulsed Induction, Metal Detector | From:SeekIC
As you can see, there is only one regulated 12 volt supply operating the entire circuit. I was able to do this simply by AC coupling the received signal to U3 via C10. This allowed me to adjust the offset within an operating window. By using a tantalum capacitor of reasonably high capacity, the signal passes with no problems. See Waveforms and Adjustments. This met my first goal.
Source: NEXT.GR
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Measuring_and_Test_Circuit/Pulsed_Induction_Metal_Detector.html
Print this Page | Comments | Reading(3)
Code: