Peak_to_peak_noise_measuring_circuit_for_frequencies_between_01_hertz_and_10_hertz

Published:2009/7/19 20:33:00 Author:Jessie | From:SeekIC

Peak-to-peak noise measuring circuit for frequencies between 0.1 hertz and 10 hertz. Typical measurements are made by reading the maximum peak-to-peak voltage noise of the device under test (DUT) for three periods for 10 seconds each (courtesy Analog Devices, Inc.).



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Measuring_and_Test_Circuit/Peak_to_peak_noise_measuring_circuit_for_frequencies_between_01_hertz_and_10_hertz.html

Print this Page | Comments | Reading(3)