Published:2011/7/1 2:44:00 Author:Ecco | Keyword: Touching , dimming, delay light | From:SeekIC
Circuit features: as long as touching the film, light will be bright and delay tens of seconds, then the light is not extinguished immediately but gradually darken until turning off. The touch switch has only two pin-out, which can directly replace ordinary light switch without having to change the original wiring. Touching the circuit once, lights can be lit 45 ~ 60s or so, if you want to change the delay time, you can adjust the resistance of resistor R6. R6 resistance is larger, the delay is longer, otherwise shorter.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/LED_and_Light_Circuit/Touching_dimming_delay_light_circuit.html
Print this Page | Comments | Reading(3)
Code: