Published:2011/7/5 21:49:00 Author:zj | Keyword: Remote control type, music, color lamp circuit | From:SeekIC
As shown in the figure it is a simple wire type music color lamp circuit. From the speaker at both ends of the audio frequency voltage through the wire connected to the A, B end, by the potentiometer RP partial pressure applied to the audio transformer T primary, audio voltage by T followed by a boost secondary to the bidirectional thyristor control VTH electrode and the second anode. When the audio frequency voltage is high, VTH opened, festoon lamp string E light; when the music stops or is weak enough to trigger the VTH, VTH in alternating current crosses zero is turned off. Therefore, the lamp string E brightness flickers with horn playing music rhythm. Regulating potentiometer RP value can modulate circuit wire sensitivity; T canadoptsmall input transformer in transistor radio.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/LED_and_Light_Circuit/Remote_control_type_music_color_lamp_circuit_1.html
Print this Page | Comments | Reading(3)
Code: