Published:2009/7/7 5:06:00 Author:May | From:SeekIC
Three or more displays can be multiplexed simply by gating 7490 counter output via 7401, then using OR connection for outputs. 7401s are switched on in rotation by positive enable signal which also switches displays on in turn. If using common-cathode displays, segment and display enable signals must be inverted. With individual display units, segments must be paralleled.-G. A. Bobker, Simplified Multiplexing, Wireless World, Feb. 1978, p 59.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/LED_and_Light_Circuit/MULTIPLEXING_OF_DISPLAYS.html
Print this Page | Comments | Reading(3)
Code: