Published:2011/4/18 10:09:00 Author:Nicole | Keyword: Delay light, power switch | From:SeekIC
The circuit delay time is decided by the discharge time constant of R2, C3. Increasing or decreasing the capacity of C3 can adjust the delay time. When adopting the polt data, press SB once, the light E will lighting about 15s.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/LED_and_Light_Circuit/Delay_light_circuit_with_power_switch_integrated_circuit.html
Print this Page | Comments | Reading(3)
Code: