Published:2009/7/25 4:19:00 Author:Jessie | From:SeekIC
Figure 8-124 shows a MAX1044 charge pump connected to provide -5 V atmicropower. Figure 8-125 shows the efficiency curve.The input voltage range is 1.5 V to 10 V output impedance is 65 Ω quiescent current is 50 μA( VIN =5 V),maximum load current is 10 mA (VIN = 4.75 V) and shutdown current is 1.5 μA.This circuit is a scaled-down verslon of the Fig.8-122,The MAX1044 is basicallyidentical to the MAX660 except for a somew,hat higher input-voltage range, a 10-times-reduced output-current, and lower cost. The fixed-frequency oscillator range is 8 to 65 kHz.MAXIM BATTERY MANAGEMENT CIRCUIT COLLECTION, 1994, P. 61.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Electrical_Equipment_Circuit/_5_V_from_a_charge_pump_micropower.html
Print this Page | Comments | Reading(3)
Code: