TOUCH_SWOTCH_OR_PROXIMITY_DETECTOR

Published:2009/6/24 23:04:00 Author:Jessie | From:SeekIC

This circuit is actuated by an increase in capacitance between a sensing electrode and the ground side of the line. The sensitivity can be adjusted to switch when a human body is within inches of the insulated plate used as the sensing electrode. Thus, sensitivity is adjusted with the 1 megohm potentiometer which de-termines the anode voltage level prior to clamping. This sensitivity will be proportional to the area of the surface opposing each other.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Electrical_Equipment_Circuit/TOUCH_SWOTCH_OR_PROXIMITY_DETECTOR.html

Print this Page | Comments | Reading(3)