PREFERRED_INSTRUMENT_SERVO_MOTOR_CONTROLLER

Published:2009/7/24 1:30:00 Author:Jessie | From:SeekIC

Used to excite control winding of 2-phase Mark 7 Mod 1 and Mark 14 Mod 0 servo motors. Delivers nominal output of 1 W to loads with effective resistance between 2,000 and 4,000 ohms. Maximum output is 50 V. CR1 is 75-ma silicon recliner with 70-V reverse working voltage.-NBS, Hand-book Preferred Circuits Navy Aeronautical Electronic Equipment, Vol. I, Electron Tube Circuits, 1963, PC 70, p 70-2.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Electrical_Equipment_Circuit/PREFERRED_INSTRUMENT_SERVO_MOTOR_CONTROLLER.html

Print this Page | Comments | Reading(3)