XC62AP Series Integrated Voltage Regulator Internal Diagram And Basic Application Circuit

Published:2011/8/17 10:12:00 Author: | Keyword: Integrated, Voltage, Regulator, Internal, Diagram, Basic, Application | From:SeekIC

The XC62AP series integrated voltage regulator is a CMOS integrated voltage regulator with linear positive voltage output. It has output voltage of +5V (XC62AP50) and+3V (XC62AP30) and other types, which could arbitrarily set the voltage between 1.1V to 6.0V by the factory (stepped voltage is 0.1V). The XC62AP series integrated voltage regulator's internal diagram and basic application circuit is shown in the picture. Picture (a) shows the XC62AP series integrated voltage regulator's internal diagram. Picture (b) shows the basic application circuit. The picture shows the XC62AP series integrated voltage regulator's internal diagram and basic application circuit. The XC62AP series integrated voltage regulator's features are super-low current consumption which typical value is 0.9uA, low voltage drop which has the typical value of 180mV at output current of 80mA, low deviation of output voltage which is about ±2％, small temperature drift. So it would be used as the super-low power consumption referenced voltage source.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Electrical_Equipment_Circuit/Other_circuit/XC62AP_Series_Integrated_Voltage_Regulator_Internal_Diagram_And_Basic_Application_Circuit.html

Print this Page | Comments | Reading(3)