Electronically_programmed_counter_using_the_Intersil_8240_50_60_16_pin_DIP

Published:2009/7/22 0:05:00 Author:Jessie | From:SeekIC

Electronically programmed counter using the Intersil 8240/50/60 16-pin DIP. Two quad exclusive-NOR circuits with open-collector outputs are wired together to form an inexpensive digital comparator. A start pulse triggers the 8240/50/60 counter and sets the output flip-flop high. The digital comparator output goes high momentarily when A is equal to B. This resets the flip-flop, which in turn resets the counter. For extended temperature range or higher speed operation individual pull-up resistor may be required on the counter outputs (courtesy Intersil, Inc.).



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Electrical_Equipment_Circuit/Electronically_programmed_counter_using_the_Intersil_8240_50_60_16_pin_DIP.html

Print this Page | Comments | Reading(3)