Published:2011/8/8 22:08:00 Author:Ecco | Keyword: Electronic password switch | From:SeekIC
The electronic password switch circuit is composed of the password input circuit, monostable flip-flop, bistable flip-flop, reset circuit, control executive circuit and count divider, and it is shown in Figure 3-96. Password input circuit is composed of buttons S0-S9. Monostable integrated circuit is composed of the internal time-base circuit of the dual time-base IC IC1 and external components of pin2-6. The bistable flip-flop is composed of IC1's another time-base IC and external components of pin8-13. Count divider circuit is composed of the counter / divider integrated circuit IC2 and resistor Rl and so on. Reset circuit consists of resistors R2, R7, and transistor Vl. Control implementation circuit is composed of setting switches S10-S12 and resistor R8, transistor VZ, relay (or electronic lock) K, diode VD.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Electrical_Equipment_Circuit/Electronic_password_switch_1.html
Print this Page | Comments | Reading(3)
Code: