Published:2011/6/19 21:57:00 Author:TaoXi | Keyword: Touch plate, relay circuit | From:SeekIC
The touch plate relay circuit is as shown in the figure, when the finger touches the 2 inches sheetmetal, the induction AC signal makes the MOSFET drain current to 1.7mA, the relay gets the power to close, if you connect the capacitor to the relay coil in parallel, you can delay the release.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Control_Circuit/Touch_plate_relay_circuit.html
Print this Page | Comments | Reading(3)
Code: