Published:2009/7/14 12:06:00 Author:May | From:SeekIC
One button turns the LED on, the other turns it off. If you apply a positive pulse to the SET input, the output tums on. It remains on until a positive pulse is applied to the RESET input to turn it off. (TTL flip-flops such as the 74LS74 are actuated by negative, rather than positive pulses.)
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Control_Circuit/Switch_Control/LATCHING_SWITCH_CIRCUIT.html
Print this Page | Comments | Reading(3)
Code: