Published:2011/5/3 19:25:00 Author:Christina | Keyword: telephone, auto transponder
The telephone auto transponder circuit is as shown in figure. IC2 is the 10 seconds voice recording circuit SR9G10A, if you press S2 to open the power, so you can entry the words which you want to tell your friends by the IC2's electret microphone. If you press Sl before go out for walk, the composite pipe's(is composed of the transistor VTl, VT2) electrode voltage VCE will be 0.65V, and the diode VD2 and transistor VT3 will not conduct.
When a call comes in, the phone ring's negative half cycle of ringing signal makes the ICl Optocoupler 4N35 conduction, IC2's PLAYE port is connected to ground to playback, one channel of the unilateral audio signal is amplified by the composite pipe to make transistor VT2's VCE increased, VD2, VT3 will conduct and relay JI will close to make the resistor Rl connects the external analog telephone (telephone's DC resistance is 300Ω); the other channel of unilateral audio signal adds to both ends of the telephone line, so your friends can hear your voice. After the sound finished, the circuit backs to the static state, relay J1 releases and the whole circuit is equivalent the hook.
(View)
View full Circuit Diagram | Comments | Reading(620)
Published:2011/5/3 9:36:00 Author:Christina | Keyword: Phone hang-up, voice reminder
With the increasing of living space, many families install some telephone extensions in different rooms, but the phone always can not be dialed in because one of the telephone extension does not hang. The phone hang-up voice reminder circuit is as shown, it can automatically issues the sound of call is not hung, please check the extensions to remind the user check the extensions.
(View)
View full Circuit Diagram | Comments | Reading(807)
Published:2011/5/3 7:42:00 Author: | Keyword: TV, brightness, auto-regulate circuit, photosensitive resistance,
View full Circuit Diagram | Comments | Reading(483)
Published:2011/5/3 8:01:00 Author: | Keyword: laser, transmitter, linearity control
Using optics feedback technology can keep invariable laser output inawide temperature change range.This circuit is a optics negative feedback that is not sensentive to temperture range.
(View)
View full Circuit Diagram | Comments | Reading(476)
Published:2011/5/3 7:36:00 Author:Christina | Keyword: FET, transformer
This circuit uses the transformer to promote the FET and has no big negative feedback loop, it is simple to debug and you can try to use it.
(View)
View full Circuit Diagram | Comments | Reading(386)
Published:2011/5/3 7:23:00 Author:Christina | Keyword: precise, variable-frequency, oscillator
The precise variable-frequency oscillator circuit is as shown:
(View)
View full Circuit Diagram | Comments | Reading(1256)
Published:2011/5/3 3:07:00 Author:Rebekka | Keyword: Motor reversing control
Motor reversing control circuit diagram. (View)
View full Circuit Diagram | Comments | Reading(841)
Published:2011/5/3 2:56:00 Author:Felicity | Keyword: Circuit of Simple Production of Wireless Headphones,
Circuit of Simple Production of Wireless Headphones is showed in the picture above. (View)
View full Circuit Diagram | Comments | Reading(660)
Published:2011/5/3 3:01:00 Author:Rebekka | Keyword: Electromagnetic, speed governing control
Electromagnetic speed governing control circuit diagram. (View)
View full Circuit Diagram | Comments | Reading(965)
Published:2011/5/3 2:31:00 Author:Rebekka | Keyword: Steam pressure switch control
Steam pressure switch control circuit diagram. (View)
View full Circuit Diagram | Comments | Reading(1802)
Published:2011/5/3 2:30:00 Author:Rebekka | Keyword: Extraction type , water level control
Extraction type water level control circuit diagram. (View)
View full Circuit Diagram | Comments | Reading(1147)
Published:2011/5/3 2:28:00 Author:Rebekka | Keyword: Water towers , reservoirs linkage
Water towers and reservoirs linkage control circuit diagram. (View)
View full Circuit Diagram | Comments | Reading(677)
Published:2011/5/3 1:41:00 Author:TaoXi | Keyword: SCM, buzzer relay
The SCM buzzer relay circuit is as shown:
(View)
View full Circuit Diagram | Comments | Reading(530)
Published:2011/5/3 1:33:00 Author:Ecco | Keyword: protection circuit , negative resistance , led
View full Circuit Diagram | Comments | Reading(504)
Published:2011/5/2 22:55:00 Author:Ecco | Keyword: Open circuit, short circuit , anti-theft , alarm circuit
AC driving light-emitting diodes can make higher output optical power, the driving circuit form is shown as the chart. The two LEDs are connected reversely in parallel, so that the positive and negative half-cycle of power have a light-emitting diode to display. (View)
View full Circuit Diagram | Comments | Reading(1067)
Published:2011/5/2 20:53:00 Author:Rebekka | Keyword: ASIC, automatic exposure control
The figure shows the diagram of using ER1211 ASIC as automatic exposure control circuit. ER1211 is the automatic exposure control ASIC in the automatic camera. The pin arrangement is shown in Figure (a), ① is the supply voltage monitoring, ② is the illumination monitoring, ③ is grounding, ④ is illumination warning output, ⑤ is relay drive output, ⑥ is exposure time delay device, ⑦ is exposure delay input, ⑧Automatic focus control, ⑨ is exposure control, ⑩ is power Vcc. When the shutter button is in the mode of half-pressed K2. If illumination environment light is lower than limit (V2 ≤ V6-0.2V), ④ pin outputs low level, low-light warning light LED light. Linkage with the flash K-selector switch is opened at the receiving position A, the corresponding C1 pass W, R1 to discharge, the exposure time (discharge time) is fixed, even if the flash automatic metering circuit does not work.
(View)
View full Circuit Diagram | Comments | Reading(720)
Published:2011/4/29 21:24:00 Author:Nicole | Keyword: thermal resistor, temperature control refrigeration, birdsong
The circuit is as shown, it consists of temperature detection circuit, power ON/OFF detection circuit, relay control motor circuit, birdsong phonation circuit and AC depressurization rectifier circuit. It keeps the temperature of the freezer within the setting temperature range, and it will send out a dulcet small bird sound. (View)
View full Circuit Diagram | Comments | Reading(1097)
Published:2011/4/29 4:34:00 Author:Nicole | Keyword: clock control, guard against theft, acousto-optic control
The circuit is as shown. It is composed of clock control timing circuit, SCR control circuit, voice phonation circuit, audio power amplifier circuit and AC depressurization rectifier circuit. This circuit is used for relics exhibition hall, temple, mosque and those occasionsoccasions when nobody is on guard during night. Before the watch keeper leaving,they shouldpreset the clock control time, such as 2:00 am. When it is the preset time, the circuit will light up the indoor lights automatically, and send out noice, to create a false impression that there is someone on duty, then to puzzle the prowler, so that the perpetrator will not rush prematurely. (View)
View full Circuit Diagram | Comments | Reading(710)
Published:2011/5/2 21:08:00 Author:Rebekka | Keyword: Three key interlock, electronic switching
Three key interlock electronic switching circuit diagram. (View)
View full Circuit Diagram | Comments | Reading(906)
Published:2011/5/2 7:41:00 Author:Nicole | Keyword: Municipal electric power, photoelectric control
In this circuit, IC1 is photoelectric isolator. When LED is lightened, photoelectric triode turns on, to trigger SCR toturn on, then to connect the high power AC load. AC municipal electric power is added to regulator tube D2, D3 and C1 through R, D1 depressurization rectifier, it will produce 30V DC voltage. T2, T3 are zero-crossing detection circuit, when the AC municipal electric power is zero-crossing, it will trigger SCR to do soft start. (View)
View full Circuit Diagram | Comments | Reading(758)
Pages:276/312 At 20261262263264265266267268269270271272273274275276277278279280Under 20 |