Published:2009/7/22 20:58:00 Author:Jessie | From:SeekIC
This circuit shows optoisolators (with triac driver outputs) that are used to trigger a sensitive-gate triac (IGT less than 15 mA) with inductive load. C1 and the 2.4-kΩ resistor form a snubber for the triac.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Control_Circuit/Optoisolator_driver_for_inductive_loads_with_sensitive_gate_triacs.html
Print this Page | Comments | Reading(3)
Code: