Published:2011/5/17 19:07:00 Author:TaoXi | Keyword: Measurement, temperature control, infrared group inspection | From:SeekIC
Related components PDF download:
BC109BCY71
The ray stream will produces the AC signal in the detector. And this ray stream will be cut off by the chopper's (rotary separator) cycle. The infrared detector is working with the constant voltage to improve the stability. The big 6.8pF coupling capacitor can make the floor frequency lower and lower. In order to reduce the transistor T1's input resistance, we pull in the negative feedback. T1 and T2's current amplification coefficient is about 100, T3 and T4 are the differential circuit.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Control_Circuit/Measurement_and_temperature_control_circuit_uses_the_infrared_group_inspection_device.html
Print this Page | Comments | Reading(3)
Code: