ELECTRONIF_THERMOSTAT

Published:2009/6/22 23:16:00 Author:Jessie | From:SeekIC

A diode, such as a IN4148, has a typical -2m V/℃ temperature coefficient at a 1 mA diode cur-rent. Q1 and Q2 form a constant current source. D1 is the temperature sensor. IC1-a and -b are dc amplifiers, with IC1-c a temperature reference voltage supply. IC1-d is a comparator with variable hysteresis. R14, R15, and R16 are chosen depending on the thermostat range desired. Q3 is a relay driver (2N3904). The relay used should handle the Ioad current or an optoisolator triac combination can be used.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Control_Circuit/ELECTRONIF_THERMOSTAT.html

Print this Page | Comments | Reading(3)