Access_time_tests

Published:2009/7/23 21:58:00 Author:Jessie | From:SeekIC

Figure 2-S shows a test circuit for measuring access time versus logic level (high) for the MAX328/29. Notice that a pulse signal is required at the analog inputs. Typical access time (or transition time) for the MAX328/39M is 1μs maximum, with 1.5μs maximum for the MAX328/29C/E.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Control_Circuit/Access_time_tests.html

Print this Page | Comments | Reading(3)