Published:2009/6/25 23:37:00 Author:Jessie | From:SeekIC
A shot of direct current will instantly stop any ac power tool motor. Switch S1 is a center-off, one side spring return. With S1 on, ac will be fed to the motor and the motor will run. To brake the motor, simply press S1 down and a quick shot of dc will instantly stop it. The switch returns to the center off position when released. This Power Brake can only be used with ac motors; it will not brake universal (ac-dc) motors. A heat sink must be provided for the diode.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Control_Circuit/AC_MOTOR_BRAKE.html
Print this Page | Comments | Reading(3)
Code: