50000_AMP_SINGLE_PULSE_CURRENT_SWITCH_

Published:2009/7/14 5:21:00 Author:May | From:SeekIC

Simple triggered-gap switch operates at voltage down to 1kv to control switching with time jitter of only 0.1 microsec between successive pulses. Can be used for magnetron testing, surge-current generator, and flash-lamp source. Output of trigger generator is clomped sine wave having sufficient amplitude to break down gap in switch and initiate current pulse. V1 and V2 serve as sharpener for triggering pulse.-E. H. Cullington, W. G. Chace, and R.L. Morgan. Low-Voltage Trigger Controls High Currents, Electronics, 31:15, p 86-88.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Control_Circuit/50000_AMP_SINGLE_PULSE_CURRENT_SWITCH_.html

Print this Page | Comments | Reading(3)