80_M_AMATEUR_RADIO_TRANSMITTER

Published:2009/7/8 4:55:00 Author:May | From:SeekIC

This transmitter consists of a keyed crystal oscillatoridriver and a high efficiency final, each with a TMOS Power FET as the active element. The total parts cost less than $20, and no special construction skills or circuit boards are required.The Pierce oscillator is unique because the high CRSS of the final amplifier power FET, 700 - 1200 pF, is used as part of the capacitive feedback network. In fact, the oscillator will not work without Q2 installed. The MPF910 is a good choice for this circuit because the transistor is capable of driving the final amplifier in a switching mode, while still retaining enough gain for oscillation. To minimize cost, a readily-available color burst TV crystal is used as the frequency-determining element for Q1.An unusual 84% output efficiency is possible with this transmitter. Such high efficiency is achieved because of the TMOS power FET's characteristics, along with modification of the usual algorithm for determining output matching.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Communication_Circuit/80_M_AMATEUR_RADIO_TRANSMITTER.html

Print this Page | Comments | Reading(3)