Wien_bridge_sine_wave_oscillator_with_electronic_amplitude_stabilization

Published:2009/7/24 20:31:00 Author:Jessie | From:SeekIC

Figure 4-34 shows a sine-wave oscillator that uses electronic stabilization in place of the lamp. Figure 4-35 shows the waveforms. Trace A shows the output. Trace B shows distortion, and trace C shows the rectifier peaking residue at the Q1 gate. LINEAR TECHNOLOGY, APPLICATION NOTE 43, P. 30, 31.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/Wien_bridge_sine_wave_oscillator_with_electronic_amplitude_stabilization.html

Print this Page | Comments | Reading(3)