Published:2009/7/24 20:35:00 Author:Jessie | From:SeekIC
Figure 4-38 shows another version of the Fig. 4-34 circuit, but with automatic trim for distortion. Q1 is replaced with an optically driven CdS photocell, and the LT1055 is replaced with a ground-sensing op amp operating in the single-supply mode. Distortion improves slightly to 0.0015%. LINEAR TECHNQLOGY, APPLICATION NOTE 43, P. 33.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/Wien_bridge_oscillator_with_automatic_trim.html
Print this Page | Comments | Reading(3)
Code: