Published:2009/7/24 13:50:00 Author:Jessie | From:SeekIC
This circuit shows an LH0033 buffer connected to form a basic two-pole high-pass filter with a 10-Hz cutoff frequency. A low-pass filter with the same frequency can be obtained by interchanging R1, R2, C1, and C2. National Semiconductor, Linear Applications Handbook, 1991, p. 542.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/Wideband_two_pole_high_pass_filter.html
Print this Page | Comments | Reading(3)
Code: