Published:2012/8/24 22:17:00 Author:Ecco | Keyword: Two -channel, switch , sample-and-hold, amplifier | From:SeekIC
Two input signals A, B are respectively added to the input end ( pin 3 ) and sampling capacitor end ( pin 6 ), pin 8 is connected to selecting pulse, and the internal switch can be used to change channels A and B, when a pulse is high (5V ), the internal switch is closed, the output is the A channel signal; when the selection pulse is low (0V), the internal switch is turned off, the signal output is the B channel. The parameters of the channel A, B are shown in the table below.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/Two_channel_switch_circuit_with_sample_and_hold_amplifier_LF398.html
Print this Page | Comments | Reading(3)
Code: