Published:2009/7/2 22:46:00 Author:May | From:SeekIC
LED comes on, and stays on until circuit is reset, if input probe receives low-level (negative-going) pulse when polarity switch is set as shown. For other position of switch, LED comes on for high-level or+5 V pulse,-R .BShreve,Troubleshooting Logic Circuits,HamRadio.Feb 1977,p 56-59,
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/TTL_PROBE.html
Print this Page | Comments | Reading(3)
Code: