Published:2009/7/10 3:39:00 Author:May | From:SeekIC
Q1 is a phototransistor that is normally illuminated by a beam of light. When the beam is intercoupled, pin 1 of U1A goes high, and forces pin4 U2B low. Then, C2 discharges through R2 and R3. After a certain time delay, pin 10 U1C goes high, triggers SCR1, and sets off the flash. R4/C1 charges, causes U1D out-put to go low after about 1/2 second, and resets U1A and U1B to the initial state. This delay prevents accidental double flash exposure.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/TIME_DELAY_PHOTO_FLASH_TRIGGER.html
Print this Page | Comments | Reading(3)
Code: